engine oil distillation regeneration equipment used motor oil
recycling plant machine with CE,ISO,SGS,BV
This technology utilized catalyzing treatment during chemical
processing. Our company developed
a kind of composite catalyst, through catalyzing, the harmful
substances are selectively processed,
for example, polymerization, shielding, passivation effect and
discharged as residues, so as to
remove the unstable factors of the waste lubricating oil, make it
became qualified lubricating base oil.
This technology is different from the traditional distillation
process with sulfuric acid,it is also different from the current hydrogenation technology. The process of this
technology is: Catalyzing treatment of waste lube oil (including gasoline engine oil,diesel engine oil
ect. almost all sorts of recyclable waste oil), and then distill to new lube base oil. The oil will not mean to
oxidate and change color, no odour. The residues can be used as fuel, it will not make secondary
pollution. This technology is high automatic, the operation is simple, no complicate operation control, easy to
learn and understand, low labour intensity, 1-2 persons are enough and no special requirement.
The used oil is mixed with catalyst in chemical treatment tank,
then it is sent to distillation kettle to
have it circulated and heated, while the temperature increasing,
the oil gas is distilled out and cooledin to liquid through three stages cooling, they’re separately
stored in water, gasoline/diesel, light lube oil, heavy lube oil receivers. The noncondensable gas will be sent to
the furnace of boiler to have it burned and discharged after pass through waste gas disposer to ensure “zero
“discharge of waste gas, The residues can be utilized as fuel to avoid pollution from it.
It’s easy to produce waste residue and bad smelling by traditional
vitriol distilling, which will bring potential secondary pollution,
moreover, it’s easy to change the color to black and produce the
odor due to the recycled oil react with the oxygen. But after we
use the alkaline complex catalyst refines the oil, the recycled oil
havn’t change the color and havn’t create the odor. What’s more
important, you can use the resid to be as the fuel to heating the
oil, without any pollution. And the machine is easy to operate,
only 1-2 workers can control the machine.
1. Easy to operate, low operation cost
2. Environmentally friendly, without secondary pollution.
3. The machine can recycle gasoline oil, diesel oil, engine oil,
rubber oil and other lubricant oil to clean oil.
4. High quality refined oil, no any discoloration caused by
oxidation, no any bad smelling.
5. Low cost contain:
1) only need the catalyst chemical, the cost is less thanUS$30 to
refine one ton waste oil.
2) Heat consumption: 105kcal per ton waste oil
3) Power consumption: 40Kwh to recycle 1 ton waste oil
6. High degree of automation.
Light Lubrication oil
Heavy Lubrication oil
Treated Oil analysis (take the waste diesel engine oil for example)
Heavy Lube oil
Light Lube Oil
Viscosity Index ≥
Anti-oxidation 150°C,min ≥
Flash Point(Open)°C ≥
Pour Point °C ≤
neutralization value (mgKOH/g) ≤
Guarantees & Documentation:
Warrant the plant supplied under this specification against defects
in material and workmanship
under normal use and service for a period of sixteen (16) months
from date of shipment or twelve (12) months after the start up of the system.
We will supply Two(2) copies of operating & maintenance manuals