Where to use oil filtration systems?
It is used to regenerate and discolor most kinds of used engine
oil, motor oil and others; also could regenerate all kinds of
ORS oil filtration systems feature:
1: Adopt special chemical for used engine oil, use physiochemical
reaction to eliminate the electric charge between polar particulate
in waste oil, which is gathered into large particles and separated;
also the colloid, bitumen and other compound in oil are also
removed. in the meantime the waste gas cleaner and vacuum
dewatering functions remove water content, thus oil is cleaned and
the effective content of oil is retained.
2: Adopt filter press, with step by step dense filtration system,
positive pressure strength remove stubborn colloid, bitumen and
3: Adopt multilevel pretreated sedimentation process, greatly
improve the recycle ability, conquer the defect of low efficiency
for discontinuous operation.
4: With advanced indirect heating system(could electronic heating
by or steam heating), quick temperature rise, stable oil
temperature, equality heating, no-damage oiliness.
5: With high technical deodorization system, effetely remove the
bad gas in the oil, to protect the environment.
6: With good filtration function, could recycle the nigrescence,
feculent oil to be clean.
7: It has a new structure, good layout and is deemed as a "mini
8: Very straightforward and evident effect, can also serve for
9: Can be tailored to meet the customized needs of individual
ChongQing QianNeng Group supply professional oil filtration
systems, if you want to buy oil filtration systems, we are your
according to the pollution degree of the used oil
|Working pessure(Mpa)||< =0.4 to 0.6|
|Vacuum range(Mpa)||-0.06 to -0.095|
|Heating transmit oil temperature||200 Degrees Celsius|
|Oil temperature||120 Degrees Celsius|
Please contact for more technical details:
Skype ID: joanna15023
Mob: 0086 13983126457
Tel: +86 23 68681154
Fax:+ 86 23 68060921